(Answer) (Category) NetMAXFAQ : (Category) Volumes :
I got the error message, "During reboot, the volume 'volume_name' (a Mirror) could not be rebuilt because disk(s) from the volume configuration were not present. An attempt will be made to rebuild one half of the mirror".
Applies to:  NetMAX FreeBSD Bld475
             NetMAX Linux 2.0.37 - 4.0x
address-suppressed
The NetMAX was able to only detect one half of the mirror volume at reboot. It will now attempt to mount the good half. If this is possible, the good side of the mirror can then be used, i.e. the mirror will be downgraded. If this is not possible, see the FAQ, "What is the disk rescue procedure?", or "Disk Rescue Procedure" in the NetMAX QuickStart Guide, Chapter IX - Troubleshooting.
address-suppressed
Previous: (Answer) I got the error message, "During reboot, volume 'volume_name' could not be accessed because disk(s) from the volume configuration were not present".
Next: (Answer) I got the error message, "During reboot, the volume 'volume_name' (a Mirror) could not be mounted because the file system consistency check failed. An attempt will be made to rebuild one half of the mirror".
This document is: http://www.netmax.org/cgi-bin/fom.cgi?file=51
[Search] [Appearance]
This is a Faq-O-Matic 2.721.
This FAQ administered by ...Cybernet Systems Corp.