(Answer) (Category) NetMAXFAQ : (Category) Installation :
The NetMAX is waiting for an IP address (it is beeping), and I have pinged it, but it does not respond.
Applies to:  NetMAX FreeBSD Bld475
             NetMAX Linux 2.0.37 - 4.0x
address-suppressed
This applies only to doing a headless install.

Make sure that the machine from which you are pinging is on the same network as the NetMAX. Make sure that the NetMAX is plugged in to your Ethernet, and check your Ethernet cables. Check that the LEDs on your Ethernet card, if available, are lit up.

If you are using the method of pinging using the "special" MAC address of 1:2:3:4:5:6, you will not see any ping responses. However, the NetMAX beeping should stop. If you are still having problems, try the ping again. Also, try the following command, which substitutes 20 for the 5:

ping -n 20 NetMAXIP
address-suppressed
Previous: (Answer) What do I do when I hear the NetMAX beeping at me about once every five seconds?
Next: (Answer) "No keyboard attached, press F1 to continue" error message appears.
This document is: http://www.netmax.org/cgi-bin/fom.cgi?file=89
[Search] [Appearance]
This is a Faq-O-Matic 2.721.
This FAQ administered by ...Cybernet Systems Corp.